Rohde & Schwarz LCX200COM Ensemble complet de milliohmmètre LCR numérique
Rohde & Schwarz LCX200COM Digital LCR Meter Bundle
Demander un devis
Rohde & Schwarz LCX200COM est un ensemble complet de milliohmmètre LCR comprenant une plage de fréquence 10 MHz, des fonctions d'analyse avancées, l'option de tri et une polarisation CC étendue.
Détails du produit
| Modèle | LCX200COM (3629.8856P99) |
| Fabricant | Rohde & Schwarz |
| Catégorie | Analyseurs LCR et d'impédance |
| Disponibilité | Sur commande |
Description
Aperçu
Le Rohde & Schwarz LCX200COM est un ensemble complet de milliohmmètre LCR combinant l'unité de base LCX200 avec des options préconfigurées conçues pour les applications de production et de recherche exigeantes. Il comprend une mise à niveau de fréquence à 10 MHz, des fonctions d'analyse avancées, des capacités de tri et une polarisation CC étendue, offrant une polyvalence et une vitesse de mesure maximales.
Caractéristiques principales
- Plage de fréquence de CC à 10 MHz (mise à niveau préconfigurée)
- Précision de base de ±0,05 % pour les mesures d'impédance
- Précision de base de ±0,03° pour les mesures de phase
- Tension de polarisation CC étendue jusqu'à 40 V
- Fonctions d'analyse avancées pour les tests complets
- Option de tri pour le tri et le test automatisés
- Fonction de journalisation des données avec jusqu'à 10 échantillons par seconde
- Temps de mesure multiples : Rapide (≤15 ms), Moyen (≤100 ms), Lent (≤500 ms)
- Impédance de sortie sélectionnable de 100Ω ou 10Ω
Applications
- Tests de production haute vitesse avec tri et tri automatisés
- Caractérisation avancée des matériaux sur une large plage de fréquence
- Validation des composants et assurance qualité en fabrication
- Applications de recherche nécessitant une analyse d'impédance complète
Caractéristiques techniques
| Selectable Frequency Range | All LCX models measure under DC conditions. The AC range already begins at 4Hz. The upper frequency limit on the LCX100 is 300kHz. In its base configuration, the LCX200 is designed for a maximum frequency of 500kHz; this frequency limit can, however, be extended to 1MHz or 10MHz. This means that the ideal instrument is available for any given application and budget. |
| Fast, Accurate and Versatile | Both LCX models combine high measurement speed, accuracy and versatile measurement capabilities. This makes them ideal for standard measurements in development, for material analysis in research as well as for fast production testing. With their broad measurement ranges, they also cover applications with extremely low and extremely high impedances. Three measurement times are available: Fast: ≤ 15ms Medium: ≤ 100ms Slow: ≤ 500ms The basic accuracy for impedance measurements is ±0.05%. and for phase measurements ±0.03° |
| Test Signals for all Requirements | Test signals can be generated from 100mV to 10V and deliver a current of up to 200mA. The instruments have a selectable output impedance of 100Ω or 10Ω. The actual current flow and the voltage applied and measured using the monitor function. |
| DC Bias | In many applications an adjustable DC bias is needed to measure C and L components at different operation points. The LCX100 and LCX200 generate a DC bias voltage of up to 10V. As an option, it is also possible to set a DC bias current (up to 200mA). DC bias voltages of up to 40V can be applied at an external connection on the rear panel (LCX-K108 option) using a standard DC power supply for example an NGA. |
| Data Logging Function | Th LCX LCR meters provide a fast logging function for recording all measured values. The data can be saved on an external USB flash drive or transferred to an external PC via USB or LAN. With a data rate of up to 10 sample/s, the measured values are available every 100ms. |
| Test Signal Frequency | DC, 4 Hz to 300 kHzDC, 4 Hz to 10 MHz (option) |
| Test Signal Voltage | 100 mV to 10 V< 1 MHz: 100 mV to 10 V > 1 MHz: 100 mV to 2 V |
| DC bias Voltage (internal) | 0 V to +10 V0 V to +10 V |
| DC bias Current (internal) | 0 mA to 200 mA0 mA to 200 mA |
| External DC bias Voltage, Input | 0 V to +40 V0 V to +40 V |
| Source Impedance | 100 Ω, 10 Ω100 Ω, 10 Ω |
| Measurement Range | 100 mΩ to 100 MΩ100 mΩ to 100 MΩ |
| Basic Accuracy for Impedance Measurements | 0.05 %0.05 % |
| LCX200 | 3629.8856.03Cp, Cs, Lp, Ls, D, Q, G, Rp, Rs, Rdc, R, X, Z, Y, Θd, Θr, B, M, N DC, 4 Hz to 500 kHz (1 MHz or 10 MHz optional) ≤ 1 MHz: 100 mV to 10 V ≤ 5 MHz: 100 mV to 2 V > 5 MHz: 100 mV to 1 V ≤ 1 MHz: 1 mA to 100 mA > 1 MHz to ≤ 5 MHz: 1 mA to 20 mA > 5 MHz: 1 mA to 10 mA 0 V - 10 V |
| LCX200 | 3629.8856.03LCR meter, 500 kHz |
Demander un devis
Rohde & Schwarz LCX200COM Ensemble complet de milliohmmètre LCR numérique
Réponse sous 24 heures
Sans engagement
Communication directe