Testeur Réseau Automatisé NETALLY LRAT-2000
NETALLY LRAT-2000 Network AutoTester
Demander un devis
LinkRunner AT LRAT-2000 est un testeur réseau robuste pour cuivre et fibre Ethernet avec test PoE TruePower™ jusqu'à 30W et support IPv6.
Détails du produit
| Modèle | LRAT-2000 |
| Fabricant | NETALLY |
| Catégorie | Équipements de test réseau et fibre optique |
| Disponibilité | Sur commande |
Description
Présentation
Le Testeur Réseau Automatisé LinkRunner AT est un testeur de connectivité réseau cuivre et fibre Ethernet robuste, rapide et complet. Il effectue un ensemble essentiel de tests de connectivité réseau avec des AutoTests configurables par l'utilisateur, vous permettant d'identifier et résoudre rapidement et précisément les problèmes de connectivité réseau. Le test rapide de câble et l'identification de commutateur du testeur facilitent l'isolation rapide des problèmes.
Caractéristiques Principales
- Support de fibre avec Port Adaptateur SFP (100BASE-FX et 1000BASE-LX/SX/ZX)
- Test PoE TruePower™ jusqu'à 30W avec test à simple extrémité
- Support IPv6
- Support Reflector
- 50 rapports au lieu de 10
- Batterie Li-ION rechargeable avec autonomie opérationnelle de 6 heures
Applications
- Tests de connectivité réseau et dépannage
- Test de câble et identification de commutateur
- Vérification de l'alimentation par Ethernet (PoE)
- Audit de réseau cuivre et fibre
Caractéristiques techniques
| Feature | Parameter |
| Dimensions | 3.5 in x 7.8 in x 1.9 in 8.9 cm x 19.8 cm x 4.8 cm |
| Weight | 18 oz 0.5 kg |
| Battery | Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) |
| Battery Life | Typical operating life is 6 hours Typical charge time is 3 hours |
| External AC Adapter/Charger | AC input 90 to 264V AC 48 to 62 Hz input power DC output 15V DC at 1.2 Amps |
| Display | 2.8 in color LCD (320 x 240 pixels) |
| Keypad | 12-key elastomeric |
| Tone Generator | IntelliTone™ Digital Tone: [500 KHz] Analog Tones: [400 Hz, 1 KHz] |
| Media Access; Copper | RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at) |
| Media Access; Fiber | SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only) |
| Cable Tests | Pair lengths opens, shorts, splits, crossed, straight through, and cable ID |
| Power over Ethernet (PoE) | Single-ended testing: User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation The following PSE PoE parameters are measured: Pairs used Received class PSE type Unloaded voltage(V) Loaded voltage (V) (LRAT-2000 with TruePower™) Unloaded power (W) (LRAT-1000) Loaded power (W) (LRAT-2000 with TruePower™) |
| Supporting Operating Systems | Windows® 8.1 and Windows® 10 Minimum hardware requirement: Processor: 1 GHz or better CPU RAM: 1 GB or more Hard Disk: 1 MB available space Display: 1024 x 768 high color, 32-bit (recommended) Interface: USB |
| Operating Temperature and Relative Humidity | 32°F to 113°F 0°C to +45°C Note: The battery will not charge if the internal temperature of the tester is above 113°F (45°C) |
| Storage Temperature | -4°F to 140°F -20°C to +60°C |
| Shock and Vibration | Random, 2 g 5 Hz-500 Hz (Class 2) 1 m drop |
| Safety | EN 61010-1 2nd edition |
| Safety (LR-AT 2000 only) | EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only) |
| Altitude | 4,000 m Storage: 12,000 m |
| EMC | FCC Part 15 Class A, EN 61326-1 |
| Certifications and Compliance | Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association |
Demander un devis
Testeur Réseau Automatisé NETALLY LRAT-2000
Réponse sous 24 heures
Sans engagement
Communication directe