Alimentation électrique à réglage automatique Farnell AP60-150
Farnell AP60-150 Autoranging Power Supply
La Farnell AP60-150 est une alimentation DC 3 kW à réglage automatique délivrant 0-60V/0-150A avec modes tension constante ou courant constant, interface GPIB et détection à distance.
Détails du produit
| Modèle | AP60-150 |
| Fabricant | Farnell |
| Catégorie | Alimentations électriques et charges électroniques |
| Disponibilité | Sur commande |
Description
Aperçu
La Farnell AP60-150 est une alimentation DC 3 kW à réglage automatique capable de délivrer 0-60V à 0-150A dans une enveloppe de puissance constante. Utilisant une topologie efficace en mode de commutation, elle fournit des combinaisons flexibles de tension et de courant adaptées à la fois à l'utilisation sur établi et à l'intégration de systèmes. L'unité offre des modes de fonctionnement en tension constante (CV) ou courant constant (CI) avec des capacités de programmation et de lecture haute précision.
Caractéristiques principales
- Sortie de puissance 3 kW : Plage 0-60V/0-150A avec combinaisons tension/courant à réglage automatique
- Opération en tension constante ou courant constant : Limitation automatique aux valeurs présélectionnées
- Interface GPIB IEEE 488.2 : Contrôle manuel ou par bus avec programmation haute résolution
- Détection à distance : Maintient la régulation à la charge sur des distances jusqu'à 0,5V de chute par conducteur
- Opération maître/esclave : Jusqu'à quatre unités peuvent être connectées pour augmenter la puissance ou la tension
- Voltmètres numériques à LED : Affichage temps réel de la tension et du courant avec indicateurs
- Design montable en rack : Topologie compacte en mode de commutation pour l'intégration de systèmes
- Pas de tension : 20 mV, Pas de courant : 50 mA
Applications
- Tests sur établi et développement d'équipements
- Intégration de systèmes et automation
- Alimentation de laboratoire pour R&D
- Tests et validation de produits
Caractéristiques techniques
| Compact and Efficient | Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems |
| Powerful Outputs | The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts. |
| Protected | CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values. |
| Remote Sensing | When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance. |
| Multiple Unit Operation | Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current. |
| AP60-150 | 20mV50mAVoltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s. Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s |
| AP60-150 | 0-60V/0-150A |
Demander un devis
Alimentation électrique à réglage automatique Farnell AP60-150